I have been asked the question multiple times “How to increase towing capacity Jeep Wrangler?” Here is a solution.
In this article, I will show you a few ways to increase the towing capacity of your Jeep Wrangler.
How to Increase Towing Capacity Jeep Wrangler?
Follow these steps on how to increase towing capacity jeep wrangler:
1. Upgrade the Hitch
Upgrading the Hitch of your Jeep Wrangler is the first step to increasing its towing capacity because these hitches come with in-built weight distribution systems, which can help distribute the trailer’s weight more evenly, making towing easier.
2. Enhance the Suspension
The towing capacity of a Jeep Wrangler can also be improved by upgrading springs and shock absorbers. The higher the spring rate on the suspension, the more weight it can carry conveniently. A powerful set of springs for your jeep can pull a lot more than the stock ones.
3. Axle Replacement
Axles of your jeep wrangler can be replaced at some RV shops for stauncher versions. These axles are particularly built for handling the load requirements in an RV hauling.
4. Install a Larger Radiator
Towing is demanding on the engine. So, boosting your engine’s cooling capacity with a larger radiator can increase the towing capacity without causing too much damage to the powertrain parts.
5. Add Aftermarket Products
A trailer brake controller is one such product that can also help increase towing capacity. It helps to regulate the braking force exerted on the trailer’s brakes. This makes it smoother to start and stop the trailer.
Check out this Jeep Air Conditioning Bypass guide to fix your Jeep’s Air conditioning.
6. Get a Roof Rack
More weight can be easily carried without any effort by including a roof rack accessory on the top of your jeep. This especially helps for activities that are seasonal such as hunting and camping.
7. Add a Winch for off-roading
An off-road winch is one such piece of equipment that can be added to increase towing capacity.
8. Improve the Braking System
There are brakes on all wheels of a vehicle. This is operated by a hydraulics system. In this way, it allows the vehicle to start and stop quickly. Brakes are a significant part of a car’s safety. You need to upgrade the brake pads and rotors with quality parts to tow heavier weights smoothly.
9. Get a Vehicle Programmer
Electronic Control Unit (ECU) is installed in all modern-day vehicles. It is a computer for the vehicle for its system management. ECU can help to get maximum torque and horsepower. This is because the programmer can adjust the onboard computer settings. Gear shift, Fuel efficiency settings, etc. can also be modified by a programmer to get the desired towing capacity.
Following these steps will answer your question on how to increase towing capacity jeep wrangler.
Why Do You Need to Increase the Towing Capacity of A Jeep Wrangler?
You need to increase the towing capacity for the following reasons:
- To accommodate heavier objects or larger loads.
- To meet the towing requirements of your specific driving needs.
- To tow a larger vehicle.
- To tow a heavy item without a trailer.
What happens if you dont Upgrade Jeep Wrangler’s Towing Capacity
You need to increase the towing capacity to avoid the following:
1. Brake Concern
Not increasing the towing capacity can decrease the brake stopping time.
2. U-Turns Become Harder
An average U-turn could turn out to be a task.
3. Decreased Acceleration
Reduced acceleration can make it challenging for your vehicle to get up to speed on the highway.
4. Damages Drivetrain
Misjudging your jeep’s towing capacity can cause expensive impairment of your drivetrain.
5. Voids Warranty
Towing more than the jeep’s rated capacity can violate its warranty. This could increase the repair costs.
How Can You Increase the Towing Capacity of A Jeep Wrangler without Spending a Lot of Money?
Upgrading to a Class III hitch is the most economical way of increasing towing capacity of a Jeep Wrangler.
Another way is to equip your vehicle with a bigger engine. This can also make a large difference in its towing capacity, but it will require you to spend a lot of money.
How Can You Increase the Towing Capacity of A Jeep Wrangler without Sacrificing Performance?
By upgrading the exhaust system to a more efficient one, you can increase the towing capacity of a Jeep Wrangler without sacrificing its performance.
What is the Maximum Towing Capacity of a Jeep Wrangler?
Jeep Wrangler 2-door models can tow up to 2000 pounds maximum, whereas all 4-door models can tow up to 3500 pounds.
Although most Wrangler trims are available in 2-door or 4-door configurations, the Sport Altitude, Sahara, and Sahara Altitude trims are only available as 4-door SUVs. So, these Wrangler trims can safely tow up to 3500 pounds of heavy cargo easily.
Why Is Jeep Wrangler Towing Capacity so Low?
The towing capacity of a Jeep Wrangler is low because its body design is very huge in size and heavy in weight. Also, Wrangler’s engine capabilities and wheelbase are contributing factors to its low towing capacity.
The weight limits are exceeded if you tow anything with a Jeep Wrangler. You are also applying pressure on the brakes, transmission, and other parts for a heavy-duty engine.
Jeep Wranglers can be driven on unpaved roads but they cannot be towed around. When hauling or towing, unnecessary harm to your Wrangler can be avoided if you first turn to your vehicle’s owner manual. Adding an extra 2000 lbs to your jeep’s suggested capacity can also help. This is why I wrote this guide on how to increase towing capacity jeep wrangler.
Can a Jeep Wrangler tow 5000 lbs?
A jeep wrangler cannot tow 5000 lbs because its maximum towing capacity is 3500 lbs.
A Jeep Wrangler is not designed to tow 5000 lbs but, making the above mentioned upgrades and modifications will help it pull more than its current limit.
Can a Jeep Wrangler tow 7000 lbs?
A jeep wrangler cannot tow 7000 lbs because the body of this vehicle is heavy in itself which is not ideal for towing very heavy loads like 7000 pounds.
Towing is not the main purpose for which Jeep Wrangler and it is only designed for purposes such as driving on harsh terrain or off-roading.
Can You Add a Tow Package to A Jeep Wrangler?
You can add a Tow package to a Jeep Wrangler and it will cost you $350 to $800. You will also need to add a trailer hitch and it’s parts, which will increase the cost to a minimum of 500 dollars.
What Is the Best Jeep Wrangler for Towing?
Jeep Gladiator, Jeep Cherokee, and Jeep Grand Cherokee are the best Wrangler models for towing as other Wranglers have a towing capacity of just 2000 lbs.
The above-mentioned points can safely help you how to Increase Towing Capacity Jeep Wrangler. Although, it may seem like increasing the towing capacity is a simple task. But it is not. This is because if certain elements are not in the correct place, it can result in serious consequences for you. It is advisable to take the help of a professional for increasing the towing capacity. Do take it for a test drive after increasing the towing capacity.